ChemResist Nitrile Gloves have many uses...
Perfect for dishes, scrubbing greasy pots, pans and grills... |
Use with ink, paint, glue, oil, turpentine and other strong chemicals... |
Keep your hands from smelling like gasoline... |
ChemResist gloves are also cut, tear and puncture resistant... |
Using gloves while working makes cleaning up afterwards much easier... |
Keep your ChemResist gloves next to your household chemicals... |
| Chemical Resistance Guide for ATLAS 720 Nitrile Gloves |
| Excellent |
Good |
Acceptable |
Not Recommended |
AMMONIA LIQUID 28%
CYCLOHEXANOL
DIBUTYL PHTHALATE
ETHYLENE SULFOXIDE
GASOLINE
HEXANE
HYDROCHLORIC ACID 20%
HYDROCHLORIC ACID 37%
ISOPROPYL ALCOHOL
KEROSENE
NAPTHA
PENTANE
PHOSPHORIC ACID
POTASSIUM HYDROXIDE
SODIUM HYDROXIDE 20%
STODDARD SOLVENT
TURPENTINE OIL
|
SULPHURIC ACID 20% |
DIMETHYL GLYCOL
ETHYL ALCOHOL
METHYL ALCOHOL
SULPHURIC ACID 80% |
ACETIC ACID
ACETONE
BENZENE
METHYL BUTHYL KETONE
METHYL ETHYL KETONE
METHYLENE CHLORIDE
TOLUENE
TRICHLORETHYLENE
XYLENE |
| This Chemical Resistance Guide should only be used as a general guide. Resistance is affected by factors such as temperature, concentration, etc. Atlas recommends that a suitability test be performed prior to use. Permeation of chemicals through a glove may not be visible to the wearer. Holes, punctures or slices in a glove would render it useless against chemical or fluid penetration. Air test gloves prior to use to check for holes. Some chemicals have not been tested. |
